![background image](http://html2.mh-extra.com/html/vela/samba-series/samba-series_instructions-for-use-manual_3912170007.webp)
7
1.4. SAFETY
This chair is CE marked and com-
plies with applicable EU regulations.
The chair is manufactured by:
VELA/VELA Medical, Gøteborgvej
8-12, 9200 Aalborg SV, Denmark.
1.4.1. APPLICATION
This chair is an indoor chair intend-
ed for sitting and private use.
::
The chair is not built to stand on
All variants of this chair are tested
and approved for a maximum load
of 125 kg.
Warning:
VELA Samba 410 is tested
and approved for a maximum user
weight of 95 kg.
1.4.2. TRANSPORT
The chair is not approved for use as
a passenger seat in any means of
transportation and may not be used
as such.
The chair is designed to be
transported under the following
environmental conditions:
Temperature: - 20°C to + 60°C
Humidity: 15-95%
Allow the chair to stand for 24 hours
before use if it has been stored
below - 10°C.
1.5. WARRANTY
VELA/VELA Medical grants a right
of claim under applicable law in the
country where the chair is acquired.
The right of complaint applies only
when using original spare parts and
accessories, as well as customisa-
tions made by professionals.
Note:
if an exclusive contractual
agreement has been made direct-
ly with VELA/VELA Medical, this
applies!
VELA/VELA Medical assumes no
liability for damages to the product
or the user caused by:
::
Transportation
::
Misuse
::
Normal wear and tear
::
Wrong use
::
Use of spare parts and accesso-
ries that are not original VELA/
VELA Medical products
::
Adjustments made by unauthor-
ised service technicians
1.6. UNPACKING THE CHAIR
The chair comes in environmentally
friendly and recyclable packaging.
In case of defects or transport
damage to the chair, please contact
your VELA/VELA Medical supplier
right away. In such cases, do not
attempt to use the chair or to fix it
yourself.