7
1.2. TROUBLESHOOTING
Mistake
Possible cause and solution
Brake function does not work
The brake is not activated. See section 2.0.3.
Upper part hangs skewed to one side
Check that both springs are fitted correctly. See section
2.0.2.
Upper part is stuck
Check that the upper part is set correctly and is the
same height on both risers. See height marking in the
inner tube. See section 2.0.2.
The gait trainer rolls badly
Wheels are blocked. Clean the wheels for wire residue
and the like.
The handle is loose
Tighten the screws
The seat height and gait height are lower than before
Loosen the top Allen screws and hand screws on the
upper part and move the upper part to the desired
position and tighten the hand screws and Allen screws
again. See section 2.0.5./2.0.6.
The seat height is lower than before
The tilt bar is folded down. See section 2.0.10.
If the above does not solve your problem, you should contact your VELA
supplier.
E N
