VELA
JIVE
EL
VELA
JIVE
100
VELA
JIVE
EL
2.
1.
3.
6
1.6. USER MANUAL
Replacement of the gas spring may only be performed
by the service support team from your dealer or a
skilled technical person.
1.6.2. ADJUSTMENT OF SEAT HEIGHT (VELA JIVE EL)
Is operated by pressing your heel towards the front edge of the
foot plate. Press the right side of the front edge to lift the seat,
and press the left side of the front edge to lower the seat.
Note
: Also available with height adjustment operated by foot
(see section 1.6.11.) and by hand (see section 1.6.16).
1.6.3. PLACEMENT OF PLUG (VELA JIVE EL)
The plug is located in the left side of the footplate (under the
seat). The plug can be removed and is used for charging the
chair.
Note
: Height function may only be used continuously for two
minute, then nine minutes of break.
1.6.1. ATTACHING THE BACKREST
The lever (1) for backrest adjustment must be in open position. Press the
locking pin spring (2) and push the backrest arm through the protective cap
and through the hole. Tighten the lever afterwards. The lever for backrest
adjustment should be pulled through the protective cap (3) as shown!
Note
: The backrest arm must be pushed through completely so the pin
spring locks the backrest arm. Make sure it cannot be pulled out again.
1.6.4. ADJUSTMENT OF SEAT HEIGHT (VELA JIVE 100)
Adjust the seat height by pushing the front lever placed at your
right hand.
