7
1.5. SAFETY
This chair bears the CE mark and
approved under the model name
”VELA Tango” and conforms to all
applicable EU rules. The chair is
manufactured by VELA Medical,
Goeteborgvej 8-12, 9200 Aalborg
SV, Denmark.
The VELA Tango 310E with electrical
functions meets all safety require-
ments according to IEC 60601-1,
including requirements for EMC
according to IEC60601-1-2.
1.5.1. INTENDED USE
This device is intended to support
a bariatric user in a sitting posture
while performing indoor activities of
daily living, including work activities.
::
The chair is not built to stand on
::
The wheel brake must always be
activated when sitting down or
standing up
All variants of VELA Tango 310 are
tested and approved for a maximum
load of 200 kg. For optimal use, the
chair‘s recommended user weight is
130-160 kg.
All variants of VELA Tango 310E are
tested and approved for a maximum
load of 300 kg. For optimal use, the
chair‘s recommended user weight is
130-300 kg.
1.5.2. TRANSPORT
When transporting the chair by
car, airplane or any other means of
transport, always use the chair brake.
The chair is not approved for use as
a passenger seat in any means of
transportation and may not be used
as such.
The chair is designed to be
transported under the following
environmental conditions:
Temperature: - 20°C to + 60°C
Humidity: 15-95%
Allow the chair to stand for 24 hours
before use if it has been stored
below - 10°C.
IN GENERAL
