Power feed with cable gland
1
2
7
8
10
11
12
13
15
1 Switch off the mains before operating
the linear lighting system.
2 Contents.
3 Use a slotted screwdriver to punch out the
desired hole(s) for the cable gland(s).
4 Remove the remaining piece(s).
5 Fit the cable gland(s).
6 Fasten the cable gland nut(s).
7 Route wiring through the cable gland and
fit with either male or female connector (depen-
ding on counterpart on the linear lighting system).
8 Insert the connector.
9 Connectors should firmly 'click' into eachother.
10 Tighten the M5 hexagon bolts on both sides-
- of the light-line.
11 Hook the coupling plate into the profiles.
12 Rotate the plate into position.
13 Tighten the M6 bolts (4x).
15 After reassuring all electrical connections
are correctly in place and corresponding,
switch the mains back on.
IP65
9
6
5
4
3
14
Item
Qty.
Power Feed
1x
Connection plate
1x
Connector female
1x
Connector male
1x
Cable gland PG13,5
2x
7/16
Manual Veko linear lighting system / IP65 / V04 / 2020-09-29 / Power feed with Cable gland
