Pool
IP65
Applicable
products
Profiles
Mounting
Coupling
Suspension
Pool application
Not all standard components can be used in a pool environment. Due to high humidity as well as vapors of chlorine
andcleaning products, high levels of corrosion can occur. To prevent corrosion, all aluminium profiles, including
mounting brackets and coupling pieces (as shown on this page) will be finished with a anodized layer of at least
25μm (according to standard). To protect the LED's, the LED-board will be provided with an extra protective coating.
All used suspension material (as shown on this page) will be hot dip galvanized.
Important notes
After installation, inspection off all used products is necessary due to safety regulations.
This inspection should be on a regular basis and occur at least once a year.
This inspection is the sole responsibility of the end user.
Applicable standards
All Veko swimming pool products and components meet the following standards:
NEN 1010 Safety for low voltage installations;
•
NEN-EN 12193 Lights and lighting - sports lighting;
•
NEN-EN 15288-1 Safety requirements for design;
•
NEN-EN 60598-1 Lighting fixtures - Part 1: General requirements and tests;
•
NEN-EN 60598-2-22 Lighting fixtures - Part 2-22: Particular requirements for emergency lighting fixtures;
•
NPR 9200 Metal suspension structures and fasteners in swimming pools.
•
13/16
Manual Veko linear lighting system / IP65 / V04 / 2020-09-29 / Pool