Veit SG67 Скачать руководство пользователя

Страница: 7 / 87

Intended use

This device has been developed, designed and built for industrial

and commercial use only. The device is intended for operation

in closed rooms only. The steam generator is equipped with an

electrical resistance heating system and is used to generate water

steam for industrial and commercial purposes.

In general, the steam generator must only be filled with normal

softened or distilled water!

Only cold water must be used as the feedwater.

Additives must only be added to the feedwater with permission of

VEIT GmbH.

WARNING!

This device is exclusively designed for the purpose

mentioned above. Any other or further use as

well as any rebuilding or retrofitting of the device

without the written consent of the manufacturer will

be deemed as not in accordance with the intended

use. The manufacturer shall not be held liable for

damages caused by such use. The user alone

bears the risk. This also applies to the installation

and setting up of safety devices and valves as

well as to any changes to load-bearing parts of the

device.

Intended use also includes adherence to operating instructions

and compliance with the inspection and maintenance intervals pre-

scribed by VEIT.

Intended use

30.09.2022

Steam generator VEIT SG67

Содержание SG67
























































































Результаты поиска

Содержание SG67

Отзывы:

Похожие инструкции для SG67

Бренды по названию

Популярные бренды

Veit SG67, Руководство по эксплуатации

Результаты поиска

Содержание SG67

Отзывы:

Похожие инструкции для SG67

Бренды по названию

Популярные бренды