background image

• Master Code

Required for programming and feature settings. Master code can be 

used to unlock the door under vacation mode. The default master 

code needs to be changed before programming.
Property owner & manager should keep this information confidential.

• Auto Lock

Automatically locks the deadbolt 30 seconds after unlocking. This 

feature is off by default. You can customize the Auto Lock time delay 

between 10 and 99 seconds.

• Key Unlock

Key Unlock is always available when the batteries are completely 

dead or valid User Codes are forgotten.

• Low Battery Indicator

If you hear 10 beeps along with 10 red light flashing after pressing 

any key to lock or unlock the door, that’s an alert for replacing 

batteries. Please replace with 4 brand new AA alkaline batteries and 

do not mix used and new batteries. All settings are stored in the lock 

while the batteries are removed and replaced.

• Wrong Entry Limit

After 10 unsuccessful attempts at entering a invalid PIN code, the 

unit will shut down for 3 minutes.

• Silent Mode

The beep sounds when pressing keypad can be muted. But you will 

still hear low battery and system alerts.

• Vacation Mode

This is a security feature for you when you are leaving your home for 

vacation or long trip. Enabling vacation mode will restrict all user 

codes until master code is entered on keypad. If the lock would be 

unlocked by the thumb turn from the inside, the lock will sound an 

alarm.

• One Time User Code

This code only can be used once and will be automatically deleted 

after used. 

• Unlock with Fake code

User can prevent pin code exposure from strangers by entering 

random digits before or after pin code.

Definitions

Programming Basic

11

Содержание RZ-A





















Отзывы: