Veilux VP-FDNC36X, Инструкция по установке и эксплуатации

Страница: 48 / 61

44 / 43

Privacy zones can be programmed (and therefore the menu can be opened) in optical zoom
situations only. The privacy zone works also in digital zoom conditions.

The privacy zone rectangle will move on the screen when panning and tilting. Zooming will expand
and contract the rectangle.

The rectangle will expand twice in the vertical direction and four times in the horizontal position to
avoid viewing protected areas when panning, tilting and zooming.

After panning and tilting, the privacy zone rectangle will shift and return to the correct dimensions.
After zooming, the rectangle will remain either contracted or expanded according to the applied zoom
(regardless of the x2 or x4 factor applied while zooming).

It is advisable to make the privacy areas slightly larger than the area to be concealed.

Privacy zones can only be rectangular or squares, but several rectangles can be placed to mask the
area as required.
EDIT WINDOW ZOOM submenu
This menu item is used to define the zoom level at which the privacy zone becomes visible after defining the color and the
position of the privacy zone.
1) Press
“►” on “
EDIT WINDOW ZOOM
”.
2) Press
OPEN
, the following screen will appear.
EDIT WINDOW ZOOM
IRIS OPEN TO CONTINUE
IRIS CLOSE TO CANCEL
Screen 26: Edit Window Zoom
3) Press
OPEN
and start the zoom setting procedure. The newly created privacy zone will appear on the monitor.
4) Use the joystick to obtain the required zoom level over which the privacy zone will become visible:
a) Turn clockwise to increase the zoom level
b) Turn anticlockwise to decrease the zoom level
5) Press
OPEN
to confirm.
4.5.4.5. HEATER SETTING
HEATER SETTING
HEATER DISPLAY ON
HEATER MODE AUTO
TEMPERATURE SET 33
℃
BACK
EXIT
Screen 27: Heater Setting
Option Value Explanation
HEATER DISPLAY ON/OFF
This switches the heater status display on and off. The
message
“
HEATER
” will appear when the heater is on.
HEATER MODE
AUTO
Heater operating mode: when set to
”AUTO”, the heater is
operated when the outside temperature is lower than the
setting made in the following menu.
OFF
The heater is always off.
ON
The heater is always on.
TEMPERATURE SET -99 ~ +99
Temperature threshold in °C under which the heater is
activated. Recommended values 18 - 20 °C
Table 21
4.5.4.6. CRUISE SETTING