Table of contents
Safety Information---------------------------------------------------- 1- 3
Accessories----------------------------------------------------------------3
Installation---------------------------------------------------------------3~4
Connecting the Monitor---------------------------------------------4~5
Viewing the control panel--------------------------------------------5
Remote control-----------------------------------------------------------6
General Specifications---------------------------------------------7~9
Basic OSD Setup
OSD setup under VGA input mode
-----------------------------------10~13
OSD setup under BNC(AV)/S-V input mode-----------------14~15
Important Safety Information
Read and understand all safety information before using this product.
Follow all instructions marked on the product and described in this
document. Pay close attention to the following installation warnings and
safety precautions.
Intended Use
This monitor was designed for AV or BNC input and tested to replace an
existing monitor. These monitors are intended for indoor use only and are
not designed for use in hazardous locations.
Explanation of Signal Word Consequences
DANGER: To avoid the risk of fire and/or explosion which will result
in serious injury or
death:
Do not install or use this product in a
hazardous location.
WARNING
:
To avoid the risk of fire which could result in serious injury
or death:
Do not remove the cover or back of the monitor.
CAUTION:To avoid the risk of electric shock which could result in
serious injury or death:
•This device must be operated with the original power supply,
•Do not use a damaged power supply.
•Do not use a power cord that is frayed or otherwise damaged.
CAUTION:To avoid the risk of electric shock which may result in
minor or moderate injury:
•The socket-outlet should be installed near the equipment and should be
easily accessible.
•Use a power cable that is properly grounded. Always use the appropriate
AC cord certified for the individual country. Some examples are listed
below:
•Do not service the monitor Do not remove the cover or back of the
monitor.There are no user serviceable parts inside. Refer all servicing to
qualified service personnel. The backlight inverter output is at high
voltage.
•Do not use non-conforming replacement parts.
1
