Veigel S00280220, Инструкция по установке и эксплуатации

Страница: 20 / 28

5-7
Assembly
Figure 5.11: Installing the Twister
Assembling the Twister
M8 = 25 Nm ±10%
8x
Screw the Twister and the
installation frame together.
Use the M8x25 fillister-head
screws, 8.4 washers and M8
hexagon nuts to do this.
Make absolutely sure that all
4 screw connections sit properly
and are not under strain.
Figure 5.12: Installation in the vehicle
M10 = 49 Nm ±10%
4x
Use the M10x40 or M10x45
fillister-head screws for installation
in the vehicle, depending on the
condition of the vehicle floor.
Use spacers to compensate for
the height difference between the
carpet and the body sheet, see
Figure 5.8.
Note the screw-in depth of the
mounting points in the vehicle.
Disassembling the installation kit
Disassemble the installation kit by following the assembly steps in reverse order.
Mount the seat using the original screws.
ATTEN-
TION!