January 2019
Page 16 of 35
Before using the Connect5 system, a final diagnostic test shall be made.
By doing this, you’ve made sure everything is in order before leaving the vehicle.
•
From your phone/tablet/computer open:
•
Log in with your credentials
•
Enter the Company
“
installer code
”
Make sure that the ignition is on before doing
the test.
1.
From the list, press
on the
appropriate subscription/vehicle.
2.
Press the button
to run diagnostic on the installation.
3.
The diagnose may take up to a few minutes to
complete, press
to update.
Check the result to see if the installation is done
properly.
The test can take up to 5 minutes
If test finishes with any errors, check installation and call your local Vehco
Support.
Step 8
-
System test without screen
