Version 0.4
26 February 2004
Page 1 of 33
For use with Vega 50 10 FXO – H.323 version 09.01.05.2 T004 or greater.
© 2004 VegaStream Ltd.
This document describes how to configure the Vega 50 10 FXO H.323 gateway using the web
browser interface. The configuration described here will allow the Vega to be rapidly installed and
tested.
The instructions below will configure the Vega 50 FXO (connected to 10 extension ports of a PBX or a
CO Switch) to operate as follows:
•
Calls presented to the Vega from the PBX or CO switch will be routed using the H.323
gatekeeper; the telephone number passed to the gatekeeper will be the port ID on which the
call was received (06 .. 13 or 56, 57).
•
Calls received by the Vega on the H.323 interface will be routed to one of the telephony
interfaces. The physical interface over which the call is routed will be defined by the leading
two digits of the telephone number (06 .. 13 or 56, 57). The digits following the leading two
digits will be used as the digits to dial.
Initial configuration
Vega 50
10 FXO
(H.323)
– R5.2
gk
H.323 Gatekeeper
LAN
Vega 50
10 FXO
pstn
05
…
POTS Telephones
…
06 13
56 57
pbx