Vega VEGASOURCE 84, Руководство по эксплуатации

Страница: 20 / 56

20
4 Mounting
VEGASOURCE 84 • Source holder
1008681-EN-230810
Material Strength class Torque Friction coeffi -
cient
Stainless steel 70 50 … 140 Nm 1.4
Steel 8.8 50 … 140 Nm 1.4
1
Fig. 9: Lock washers (customer side) as screw locking device and conductive
connection to potential equalization
1 Lock washers (2 pieces)
To protect the switching mechanism of the VEGASOURCE 84 from
dirt or contamination, a metallic protective cap is available.
This also allows the padlock to be permanently protected from dirt,
moisture and corrosion.
The protective cap can only be used on the devices with manual
switching ON/OFF.
1. Put on protective cap
Turn the protective cap 180° if it does not fit correctly.
2. Turn the protective cap clockwise until the straps are below the
fastening screws.
3. Tighten the fixing screws manually
1
2
3
Fig. 10: Putting on the protective cap
1 Put on protective cap
2 Turn the straps of the protective cap under the fastening screws
3 Tighten fixing screws
The switching status of the source holder can also be seen when the
protective cap is in place.
Cover (optional)