11
5 Set up with the display and adjustment module
VEGAPULS 66 • Foundation Fieldbus
47151-EN-210621
1
2
Fig. 6: Installing the display and adjustment module in the double chamber
housing
1 In the electronics compartment
2 In the connection compartment
Note:
If you intend to retrofit the instrument with a display and adjustment
module for continuous measured value indication, a higher lid with an
inspection glass is required.
5.2 Parameter adjustment
The instrument is preset by default with the suitable parameters for "
Application", " Min. adjustment" and " Max. adjustment".
For adaptation of the parameter " Medium" you have to proceed as
follows:
1. Go to the menu " Setup" via the display and adjustment module.
2. In the menu item " Medium"you select the medium of your ap-
plication, for example "
Solvent".
The radar sensor measures the distance from the sensor to the
medium surface. For indication of the real level, an allocation of the
measured distance to the percentage height must be carried out.
Set parameters
Parameterization example