Vega VEGAPOINT 23, Руководство по эксплуатации

Страница: 31 / 52

31
7 Setup
VEGAPOINT 23 • Transistor (PNP/NPN)
56627-EN-210210
See also chapter " Access protection ".
Protection of the parameterization
In this menu item you can also protect the parameter adjustment of
the sensor.
For this function you need the six-digit device code.
The device code can also be found in the "
PINs and Codes " sheet of
the shipping documentation.
See also chapter "
Access protection ".
After a reset, parameter adjustments made by the user are reset.
The following reset functions are available:
Restore basic settings: Resetting the parameter settings incl. spe-
cial parameters to the default values of the respective device.
Restore delivery status: Restores the parameter settings at the time
of shipment from the factory, incl. order-specific settings. This menu
item is only available if order-specific settings are available.
Note:
The default values set at the factory can be found in the table of the
menu plan at the beginning of this chapter.
In this menu item you can define the temperature unit of the device
(UNI).
•
°C
•
°F
7.4.3 Diagnostics
In this menu item you can retrieve the status of the device.
•
Device status
•
Status outputs
•
Parameter modification counter
The display " Device status " provides an overview of the current
status of the device.
If fault messages or other information are available, a corresponding
message is displayed here.
The display "
Status outputs " gives an overview of the current status
of the device outputs.
The menu item "
Parameter modification counter " gives a quick
overview of whether the device has undergone a change in the
parameters.
The value is increased by one each time the parameters of the device
are changed. The value is retained in the event of a reset.
In this menu item you can retrieve the pointer function of the device.
For each pointer there is a max. and a min. value.
In addition, the current value is displayed.
Reset
Units
Status
Peak value indicator