Vega VEGAMET 141, Инструкции по безопасности

Страница: 14 / 56

12 VEGAMET 141, 142 • Installation in non-Ex area
63696-01-201218
Abb. 2: VEGAMET 141, 142 on carrier rail
Ambient temperature
The installer must ensure that the rated ambient temperature range of the device is not exceeded
when it is installed in a housing together with other devices and that adequate separation is provi-
ded around the device.
Communication, service
The service sockets 1HART, 2HART are parallel to the intrinsically safe output terminals 1, 2 or 4, 5.
6 Safe operating mode
General operating conditions
•
Do not operate the instrument outside the electrical, thermal and mechanical specifications of
the manufacturer
Connection conditions
•
The connection cable of VEGAMET 141, 142 has to be wired fix and in such a way that dama -
ges can be excluded
•
If the temperature at the entry parts exceeds 70 °C, temperature-resistant connection cables
must be used
7 Important information for mounting and maintenance
General instructions
The following requirements must be fulfilled for mounting, electrical installation, setup and mainte -
nance of the instrument:
•
The staff must be qualified according the respective tasks
ATEX