Vega VEGADIS 363 Скачать руководство пользователя страница 7

Страница: 7 / 56

44054-US-131121

1 Remote Display System

1.1 Overview

This document describes the basic configuration of the VEGA devices connected

to the Remote Display System. The configurations described are necessary for

the accuracy and proper operation of the Remote Display System level

monitoring, system alarms, and displays.

1.2 System Operation

The VEGA level measurement device, in combination with the RD, provide the

level information to the Remote Display. Each RD can handle one (1) VEGA, 2-

wire HART device. The Remote Display interface can display level, percent (%),

scaled value, and distance. The following requirements are necessary for the

proper operation:

•

You must attach devices to the RD with the field devices set for HART

Multidrop mode.

•

Each device connected to the RD must have a HART address in the

range of 1.

•

The RD communicates with the VEGA PLICSCOM using I

communication.

1.3 System Features

The RD system has the following features:

•

Power options via battery.

•

Numeric visualization: Scaled measured values display on the backlit

LCD screen.

•

Connect to any VEGA two-wire HART multidrop device.

Note:

Do not use the device in the standard 4 ... 20 mA mode.

Using the device in this mode drains the batteries.

NOTE

Содержание VEGADIS 363

























































Результаты поиска

Содержание VEGADIS 363

Отзывы:

Похожие инструкции для VEGADIS 363

Бренды по названию

Популярные бренды

Vega VEGADIS 363, Руководство по эксплуатации

Результаты поиска

Содержание VEGADIS 363

Отзывы:

Похожие инструкции для VEGADIS 363

Бренды по названию

Популярные бренды