Vega VEGADIF 85, Руководство по эксплуатации, Страница: 50 / 96

50
6 Set up the sensor with the display and adjustment module
VEGADIF 85 • Profibus PA
53569-EN-230814
Select the requested simulation variable and set the requested value.
To deactivate the simulation, you have to push the
[ESC] key and
confirm the message " Deactivate simulation " with the [OK] key.
Caution:
During simulation, the simulated value is output as digital signal.
The status message along with the Asset Management function is "
Maintenance ".
Note:
Without manual deactivation, the sensor terminates the simulation
automatically after 60 minutes.
6.5.4 Additional adjustments
In this menu item, you adjust the internal clock of the sensor. There is
no adjustment for summer/winter (daylight saving) time.
After a reset, certain parameter adjustments made by the user are
reset.
The following reset functions are available:
Delivery status: Restores the parameter settings at the time of
shipment from the factory, incl. the order-specific settings. Any user-
defined linearisation curve as well as the measured value memory are
deleted.
Basic settings: Resets the parameter settings, incl. special param -
eters, to the default values of the respective instrument. Any pro -
grammed linearisation curve as well as the measured value memory
are deleted.
Totalizer 1 and 2: Reset of the summarized flow volumes with ap -
plication "Flow"
The following table shows the default values of the instrument. De
-
pending on the instrument version or application, all menu items may
not be available or some may be differently assigned:
Date/Time
Reset