8
3 Product description
VEGACONNECT 4 with connection box • Interface converter USB - HART/I²C
32628-EN-170202
possibility for the magnet pen. You can find further information of this
application in the operating instruction of PLICSCOM.
The interface converter is connected via the USB interface to a PC. It
converts signals and protocols of the USB interface into the appropri-
ate signal/protocol of the connected instrument.
The voltage supply is provided via the USB interface of the PC.
Detailed information about the power supply can be found in chapter
"Technical data".
3.3 Adjustment
The adjustment is carried out via a Windows PC with a parameter
adjustment software such as PACTware with respective DTM. There
are no adjustment elements on the instrument itself.
3.4 Packaging, transport and storage
Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
based on ISO 4180.
The packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE
foil is also used. Dispose of the packaging material via specialised
recycling companies.
Transport must be carried out in due consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or con-
cealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
•
Avoiding mechanical shock and vibration
•
Storage and transport temperature see chapter "Supplement -
Technical data - Ambient conditions"
•
Relative humidity 20 … 85 %
Functional principle
Voltage supply
Packaging
Transport
Transport inspection
Storage
Storage and transport
temperature
