25
6 Set up the sensor with the display and adjustment module
VEGABAR 87 • Modbus and Levelmaster protocol
46297-EN-220624
1
2
4
3
Fig. 18: Display and adjustment elements - with adjustment via magnetic pen
1 LC display
2 Magnetic pen
3 Adjustment keys
4 Lid with inspection window
When the
[+]
and
[->]
keys are pressed quickly, the edited value,
or the cursor, changes one value or position at a time. If the key is
pressed longer than 1 s, the value or position changes continuously.
When the
[OK]
and
[ESC]
keys are pressed simultaneously for more
than 5 s, the display returns to the main menu. The menu language is
then switched over to "
English
".
Approx. 60 minutes after the last pressing of a key, an automatic reset
to measured value indication is triggered. Any values not confirmed
with
[OK]
will not be saved.
6.3 Measured value indication
With the
[->]
key you can move between three different indication
modes.
In the first view, the selected measured value is displayed in large
digits.
In the second view, the selected measured value and a respective
bargraph presentation are displayed.
In the third view, the selected measured value as well as a second
selectable value, e.g. the temperature, are displayed.
With the "
OK
" key you move (during the initial setup of the instru-
ment) to the selection menu "
Language
".
In this menu item, you can select the national language for further
parameterization.
Time functions
Measured value indica-
tion
Selection language
