manualshive.com logo in svg

Vega VEGABAR 83, Руководство по эксплуатации, Страница: 36 / 96

Поделиться
Скачать
Vega VEGABAR 83 Скачать руководство пользователя страница 36

36

6 Set up with the display and adjustment module

VEGABAR 83 • Modbus and Levelmaster protocol

46295-EN-131107

user especially when adjusting the switching point on the limit signal 

transmitter.

In menu item "

Scaling

" you define the scaling variable and the scaling 

unit for the level value on the display, e.g. volume in l.

In menu item "

Scaling (2)

" you define the scaling format on the display 

and the scaling of the measured level value for 0 % and 100 %.

In the menu item "

Lock/unlock adjustment

", you can protect the 

sensor parameters against unauthorized modification. The PIN is 

activated/deactivated permanently.
The following adjustment functions are possible without entering the 

PIN:

• 

Select menu items and show data

• 

Read data from the sensor into the display and adjustment mod-

ule.

Caution:

With active PIN, adjustment via PACTware/DTM as well as other 

systems is also blocked.
You can change the PIN number under "

Additional adjustments - 

PIN

".

This menu item enables the setting of the requested national lan-

guage.

The following languages are available:

• 

German

• 

English

• 

French

• 

Spanish

• 

Russian

• 

Italian

• 

Dutch

Setup - Scaling (1)

Setup - Scaling (2)

Lock/release setup - Ad-

justment

Display - Language

Содержание VEGABAR 83

































































































Отзывы:

Нет отзывов