manualshive.com logo in svg

Vega VEGABAR 28, Руководство по эксплуатации

Поделиться
Скачать
Vega VEGABAR 28 Скачать руководство пользователя страница 12

12

3 Product description

VEGABAR 28 • Three-wire 1 x transistor or 4 … 20 mA

57534-EN-220826

3.3 Adjustment

Devices with integrated Bluetooth module can be adjusted wirelessly 

via standard adjustment tools: 

1)

 

• 

Smartphone/tablet (iOS or Android operating system)

• 

PC/notebook (Windows operating system)

3

2

1

Fig. 8: Wireless connection to standard operating devices with integrated 

Bluetooth LE
1 Sensor

2 Smartphone/Tablet

3  Bluetooth USB adapter

3.4  Packaging, transport and storage

Your instrument was protected by packaging during transport. Its 

capacity to handle normal loads during transport is assured by a test 

based on ISO 4180.
The packaging consists of environment-friendly, recyclable card-

board. For special versions, PE foam or PE foil is also used. Dispose 

of the packaging material via specialised recycling companies.

Transport must be carried out in due consideration of the notes on the 

transport packaging. Nonobservance of these instructions can cause 

damage to the device.

The delivery must be checked for completeness and possible transit 

damage immediately at receipt. Ascertained transit damage or con-

cealed defects must be appropriately dealt with.

Up to the time of installation, the packages must be left closed and 

stored according to the orientation and storage markings on the 

outside.
Unless otherwise indicated, the packages must be stored only under 

the following conditions:

Wireless adjustment

Packaging

Transport

Transport inspection

Storage

1) Reduced effective range with continuous stainless steel housing, see chap-

ter "Technical Data"

Содержание VEGABAR 28

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды