21
4 Mounting
VEGASOURCE 82 • Source holder
66076-EN-220119
However, with large measuring ranges and small vessel diameters, a
gap can often not be avoided.
If there are gaps or empty spaces around the installation, provide
protective fences or grids to keep hands away from the dangerous
area. Such areas must be marked accordingly.
3
2
1
5°
Fig. 13: Installation positions - Point level detection with MINITRAC 31
1 Horizontal mounting
2 Vertical mounting
3 Mounting horizontally, at right angles to container
For reliable point level detection over the entire vessel diameter, a
correspondingly long level sensor can also be used. In the case of
bulk solids, the reaching of a limit level on a large container cross-
section can be reliably detected.
To do this, select the largest possible beam exit angle and mount the
source holder rotated by 90°.