29
7 Setup
PLICSMOBILE T81/B81/S81 • External GSM/GPRS/UMTS radio unit
55234-EN-170206
To avoid misuse, the SIM card is generally locked by a PIN. To ensure
that PLICSMOBILE can contact these locked SIM cards, first of all
the PIN must be entered. For this purpose the assistant "
Activate SIM
card
" is available in the DTM. Enter here the correct PIN for the card.
The assistant also offers the option of changing the PIN.
Information:
When using the VEGA Ident Card, entering or deactivating a PIN is
not required.
Then check if the card is logged into the network and if sufficient net-
work coverage (signal strength) exists. For a reliable measured value
transmission, a signal strength of at least 30 % should be displayed.
This can be checked in the DTM menu "
Network information
" under
"
Setup - Diagnosis
". You can also see the general device status via
the status indication.
The following operating conditions are signalled via the yellow LED
(mobile network status indication):
•
LED does not light:
no operating voltage or power saving mode
active
•
Constant flashing:
Instrument is not logged into the GSM net-
work
•
Unsteady flashing (long OFF/short ON):
instrument is booked
into the GSM network
•
Continuous light:
Transmission or dial-up connection active
•
Quick steady flashing after continuous light
Measured value
transmission failed
The following operating conditions are signalled via the blue LED
(Bluetooth status indication):
•
LED does not light:
Bluetooth switched off or power saving mode
active
•
Unsteady flashing (long OFF/short ON):
Bluetooth switched on
•
Permanent light:
Bluetooth connection is active
Information:
When the PLICSMOBILE T81 is in power saving mode, the LED
status indicators are inactive. The LED indicators are active only dur-
ing the time when a measurement with subsequent measured value
transmission takes place.
By pushing this button, a manual measured value transmission will be
triggered, independent of the configured time settings. This functions
also if PLICSMOBILE is in power saving mode. Here you can check
by means of the yellow status LED if logging into the GSM network is
possible.
7.5 Internet connection and measured value
transmission
The transmission of measured values via e-mail or to VEGA Inventory
System is always based on an internet connection. For GPRS con-
Activate SIM card
Status indication
"Send" button
Internet connection
