31
7 Setup
PLICSMOBILE • Mobile network unit PLICSMOBILE T81
55234-EN-191217
measured value and echo curves. In addition, there is a tank calcula-
tion program as well as a VEGA DataViewer for display and analysis
of the saved measured value and echo curves.
The VEGA Bluetooth USB adapter is required for communication with
PLICSMOBILE T81. A Bluetooth interface (possibly already installed
in the PC or notebook) or a USB adapter from another manufacturer
cannot be used. You can find further information in the instructions
booklet of the Bluetooth USB adapter.
Make sure that the Bluetooth switch on the electronics module of
PLICSMOBILE T81 is set to "On" and the Bluetooth USB adapter is
inserted on the PC.
Start the project assistant in PACTware; the Bluetooth USB adapter,
the PLICSMOBILE T81 and the connected sensors should then be
found and displayed in the project window.
For the first connection, the DTM and PLICSMOBILE must authenti-
cate each other. For this purpose, the Bluetooth access code stored
in PLICSMOBILE must be entered in the DTM. You can find further
information in chapter "
Access protection
".
Now carry out the parameter adjustment of PLICSMOBILE or the
sensor via the respective adjustment menu.
7.5 Parameter adjustment with the VEGA
Tools app
Make sure that your smartphone/tablet meets the following system
requirements:
•
Operating system: Apple iOS 8 or newer
•
Operating system: Android 4.3 or newer
•
Bluetooth Smart from 4.0
Download the app "VEGA Tools" from the Apple App Store, Google
Play Store or Baidu App Store to your smartphone or tablet.
Make sure that the Bluetooth function on the upper side of the elec-
tronics module is activated.
Start the "
VEGA Tools
" app and select the function "
Setup
" in the
main menu. The smartphone/tablet searches automatically for all
Bluetooth-capable instruments in the area.
All instruments found are listed in the adjustment window, the search
is automatically continued. Select the requested PLICSMOBILE T81
in the instrument list to start connection.
For the first connection, the app and PLICSMOBILE T81 must
authenticate each other. For this purpose, the Bluetooth access code
stored in PLICSMOBILE T81 must be entered in the app. You can find
further information in chapter "
Access protection
". A coupling request
must be confirmed with Apple device after entering the Bluetooth
access code.
Bluetooth USB adapter
Connecting via Bluetooth
Authenticate
System requirements
Activate Bluetooth
Connecting …
Authenticate
