Vega NB-14 / User Manual
23
Revision 03 – 14 July 2020
}
Transcription of the message fields:
Message – part with information about current message.
dev – name and version of the device firmware
IMEI – LTE-modem identifier
IMSI, ICCID – SIM-card (SIM-chip) identifiers
num – the number of the message
UTC – the date and the time of message sending in UTC format by Greenwich
CellStatus – part with information about the cellular state
TAC, CID – gateways identifiers
SQ – gateway signal quality
EARFCN – the number of radio frequency channel (absolute)
PCID – physical network address
RSRP – input signal power
RSRQ – input signal quality
RSSI – indicator of the input signal power
SNR – signal to noise ratio
Telemetry – part with collected data (one packet)
reason – reason for packet forming*
UTC – the date and the time of message collecting in UTC format by Greenwich
bat – battery charge
temp – processor temperature
RAW – wire resistance on channel А [Ohm] (RAW - Resistance, channel A, Wire)
RAI – insulation resistance on channel А [kOhm] (RAI - Resistance, channel A,
Isolation)
RBW – wire resistance on channel B [Ohm] (RBW - Resistance, channel B, Wire)
RBI – insulation resistance on channel B [kOhm] (RBI - Resistance, channel B,
Isolation)
onewire – values of temperatures of sensors on 1-Wire bus
s_alarm1 – state of ALARM1 input at the time of data slice ("0" - logic zero input,
"1" - logic one input)
s_alarm2 – state of ALARM2 input at the time of data slice ("0" - logic zero input,
"1" - logic one input)
s_magnet – the presence of an external magnetic field at the time of data slice
("0" - absent, "1" - presence)
s_raw – alarm flag, signal wire breakage on channel A ("0" - normal, "1" - breakage)
s_rai – alarm flag, insulation resistance lower than threshold on channel A ("0" -
normal, "1" – under threshold)
s_rbw – alarm flag, signal wire breakage on channel B ("0" - normal, "1" - breakage)
s_rbi – alarm flag, insulation resistance lower than threshold on channel B ("0" -
normal, "1" – under threshold)
