Vega NB-14 / User Manual
13
Revision 03 – 14 July 2020
INITIAL STARTUP
Firstly, it is necessary to install SIM into slot on the board and set up the data transmitting
with “Vega NB-IoT Configurator” (See part 4).
Vega NB-14 modem powered by the one or two batteries which comes with
. There are
equivalent connectors located on the board. After battery connection to one of connectors,
the device loaded and switched to the ‘Sleep’ mode until the communication session according
with the schedule.
If you need to test the data transmitting, then press and hold the INIT button for the 2
seconds.
CONNECTING VIA USB
The modem with 4-20 mA interface can be adjusted with the "Vega NB-IoT
Configurator" application through the USB connection (See part 4).
Before connecting the device to the computer for the first time, you must install the
driver for the COM port stsw-stm32102, which can be downloaded from
. After
running the executable file VCP_V1.4.0_Setup.exe, the installer window will appear:
1
The number of included batteries depending on the delivery conditions
Location of the SIM
slot on the board (if
there is)
Battery connectors
location on the
board
