Vega ENCSER, Руководство по программному меню

Страница: 8 / 12

7
The programming procedure is completed and the data are stored.
Menu 3: It allows to choose the number of expansion (ENCSER_EXP) connect.

Press the T1 (SELECT) button 3 times. Display will visualize the string ” P3
”;

Press the T2 (ENTER) button to access to the programming menu. The digits visualize the
current value.

With the T1 (SELECT). button it is possible to choose the number of the connected
expansions (00= no expansions connected, 03= 3 expansions connected)

Press the T2 (ENTER) button to confirm the desired value.
The programming procedure is completed and the data are stored.
Menu 4: Using 1 wire per floor it allows to programme I7, I8 and I9 inputs respectively with the
signalling of overload, gong and out of service.

Press four times the T1 (SELECT) button. Display will visualize the string ” P4
”;

Press the T2 (ENTER) button to enter the programming menu. The digits visualize the
current value.

With the T1 (SELECT). button it is possible to choose the number of value;
Menu 4=0 Menu 4=1
I7 Input of floor 7 Overload
I8 Input of floor 8 Gong
I9 Input of floor 9 Out of service

Press the T2 (ENTER) button to confirm the desired value.
The programming procedure is completed and the data are stored.
Menu 5:
Allows to activate the function “memorize floor”
Press five times the T1 button (SELECT). Display will visualize the writing “ P5
”:

Press the T2 button to access on the programming menu.
The digits show the current value.

With the T1 button (SELECT) it is possible to choose the managing mode:
0=normal working (the board calculates the floor according the inputs status);
1=”floor memorizing” mode, the board does not consider the inputs status (all-off
combination) and displays the last valid floor.

Press the T2 (ENTER) button to confirm the value.
Menu 6: It allows to choose what characters to display for each selected floor.

Press five times the T1 button. Display will visualize the writing ” P6” ;

Press T2 (ENTER) button to enter the programming menu (digits show the current value);

With the T1 (SELECT) button select the floor that you want to change the symbol;

Press T2 (ENTER) to confirm the floor;

With the T1 (SELECT) button it is possible to choose the character to assign on the floor
Press the T2 (ENTER) button to confirm the character;

Repeat the procedure to choose the character that will be visualize on the second digit.