Vega DSP-223, Техническое руководство

Страница: 11 / 59

Tone Remote 7
4 Programming and Operation
All programming for the DSP-223 is through an RS-232C serial port located on the front panel of the unit.
Programming kit (P/N DSP223PRG) may be purchased separately from the DSP-223 and installed on a
Windows 95 or newer computer. The latest DSP-223 operating software and Windows® application may
also be down loaded from
www.vega-signaling.com/dspsoftware.htm
4.1 Software Installation
The Windows®
application file is
included on the
VEGA Product
Information CD
provided with the
DSP-223.
Launch the CD and
click on
Firmware
– then click on
DSP-223 . Follow
the instructions for
saving the file to
the PC. When the
application starts,
an opening screen
as shown in Figure
4 should appear.
4.2 Windows® Application Software Operation
4.2.1 Select a Serial Port
Clicking Com Port on the main menu screen opens the dialog box
shown in Figure 5. Select either Com1 or Com2 and then click OK to
close the dialog box. The Windows® application will set the serial port
configuration. A 9 pin serial cable is provided to connect the DSP-223
and the PC.
NOTE: The selected port is not saved and will default to Com1
each time the software is run.
Figure 4 Windows Programming Main Screen
Figure 5 Serial Communications Port Screen