Vega NB-15 / User Manual
21
Revision 01 – 22 January 2020
"ADC2": 1550,
"temp": 23,
"s_alarm1": 1,
"s_alarm2": 1,
"onewire": [
23.3
]
}
}
Transcription of the message fields:
Message – part with information about current message.
dev – name and version of the device firmware
IMEI – LTE-modem identifier
IMSI, ICCID – SIM-card (SIM-chip) identifiers
num – the number of the message
UTC – the date and the time of message sending in UTC format by Greenwich
LBS – part with information about the gateway parameters which resend that packet
TAC, CID, MCC, MNC – gateway identifications
ACT– technology (9 – LTE Cat.NB1)
SQ – gateway signal quality
CellStatus – part with information about the cellular state
EARFCN – the number of radio frequency channel (absolute)
PCID – physical network address
RSRP – input signal power (in santibells
RSRQ – input signal quality (in santibells
1
)
RSSI – indicator of the input signal power (in santibells
1
)
SNR – signal to noise ratio
Telemetry – part with collected data (one packet)
reason – reason for packet forming*
UTC – the date and the time of message collecting in UTC format by Greenwich
bat – battery charge
pulse1 – pulse number on the input 1
pulse2 – pulse number on the input 2
ADC1 – voltage value on the analog input 1
ADC2 – voltage value on the analog input 2
temp – processor temperature
s_alarm1 – state of ALARM1 input at the time of data slice ("0" - logic zero input,
"1" - logic one input)
1
Decibels multiplied by 10
