M-BUS-1 / User Manual
22
Revision 10 - 27 May 2019
ADR
–
this option activates the Adaptive Data Rate algorithm for automatic control of
the data transfer rate from the LoRaWAN network server side. The higher the quality of the
signal received by the network, the higher the speed will be installed on the device. This option
is recommended only on permanently installed devices.
RX1 offset
(not displayed in the "Simple" mode)
–
specifies the time between end of
packet transmission and first receiving window opening. The second receiving window always
opens after 1 second after the first.
Join accept delay 1
(not displayed in the "Simple" mode)
–
sets the time that the device
will open the first receiving window to receive confirmation for the join request from the
LoRaWAN network. The second window always opens after 1 second after the first.
