M-BUS-1 / User Manual
17
Revision 10
-
CONNECTION TO THE DEVICE
For the connection to the device, perform the following steps:
1.
Connect the USB cable to the device.
2.
Start the "Vega LoRaWAN Configurator" application.
3.
Click the "Connect" button in the menu on the left.
The application automatically recognizes the device model, and the device selection
menu becomes inactive.
To read the settings from the device, you need to click the "Get settings" button, until
this point the application will display the default settings or from the last connected device.
After making the necessary changes to the settings, you should click the "Apply settings"
button and only then disconnect from the device with the "Disconnect" button.
