SPEAKER VOLUME HI/LOW ADJUSTMENT
Slide the SPEAKER switch to HI/LOW to adjust the ringer volume according to personal preference
ALERT FUNCTION
Slide the switch to “ON” position; abnormal users can’t parallel another telephone to make a call. If users need to
parallel another telephone, please turn alert switch to “OFF” position.
IP access number setting
Press Set key, and then Out key, LCD displays PASS- , input the password up to 5 digits and followed by # (the
original value is 54321), LCD displays -1-2-3-, and then you come to the setting status.
Press 1 to modify the password and LCD displays PASS -54321-
→
input the digit up to 5 digits
→
press Set
key to affirm and return to setting status.
Press 2 to set IP access number of the first group IP1 and LCD displays GATE1-
→
input IP access number
→
press
Set key to affirm and return to setting status.
Press 3 to set IP access number of the second group IP2 and LCD displays GATE2-
→
input IP access number
→
press Set key to affirm and return to setting status.
Note: while there comes a suggestive tone during inputting IP access number, you must press Dial key once after
inputting IP access number, which means only after detecting the suggested tone can latter numbers be dialed. You can
also set IP information by delay mode and press Redial key once to delay one second. The number of Redial is
changeable to suit the proper surroundings.
IP account number, password number setting
Press Set key, and then DEL key, LCD displays PASS- , input the password up to 5 digits and followed by # (the
original value is 12345), LCD displays -1-2-3-4-, and then you come to the setting status.
Press 1 to modify the password and LCD displays PASS-12345
→
input the digit up to 5 digits
→
press Set key to
affirm and return to setting status.
Press 2 to set IP information of IP1 and LCD displays IP1-
→
input IP account number
→
input IP password
→
press
Set key and LCD displays 01-0 and enter IP open area code setting mode
→
input the corresponding open area code of
IP1
→
press Set key to set the next group (50 groups in all)
→
press Set key to set the end code
→
input end code
→
press Set key to exit.
Press 3 to set IP information of IP2 and LCD displays “IP2- ”. The setting of IP2 is similar to IP1.
Note: when there comes a suggestive tone during inputting IP account number and password, you must press Dial key
once after inputting IP account number, which means only after detecting the suggested tone can latter numbers be
dialed. You can also set IP information by delay mode and press Redial key once to delay one second. The number of
Redial is changeable to suit the proper surroundings.
Press 4 to set the locked number and LCD displays “01- ”, input the number and press Set key to set the next (20
groups in all).
ANSWERING CALLS
When receiving a phone call, the telephone will detect the FSK or DTMF format and display the calling number. If
this is a FSK format, caller ID signal, the current date and time will also be displayed. If this is a newly coming call,
the “NEW” icon will be displayed. If the incoming call is a repeated number, the “REP”icon will be displayed. If
the incoming call is a private call, the icon ---P--- will be displayed. If the incoming call is out of area, the icon ---O-
-- will be displayed. If a wrong number comes in, the ---E--- will be displayed.
From Handset
1.
Pick up the handset. Talk with the other end.
2.
When finished, return the handset to the cradle
NOTE: To receive the Caller ID message correctly, please answer a call after the telephone rings two times.
