VeEX RXT3900 Скачать руководство пользователя

Страница: 324 / 383

The Loopback function can be found on the Fiber Channel Home menu.

FC-1/2 Manual Loopback Setup

Modes of operation:

Manual and Responder (future)

Mode (FC layer):

FC-1 or FC-2 Layer loopbacks are supported. In FC-2 mode, the destination and source IDs (D_ID and S_ID) are

swapped including any other relevant Header fields (e.g., OX_ID, RX_ID, etc.).

FC-1/2 Manual Loopback Active

To enable the loopback, press

Start

from the drop-down menu. Once the loopback is enabled, the loopback symbol appears

indicating that the loopback is active.

Go back to top

Go back to TOC

14.5 Packet Capture

The packet capture function can be used to capture packets to Fiber Channel test ports. The packet capture format is compatible with

Wireshark and can be viewed on a PC.

The following packet capture options are available in the

Capture Mode

tab:

Profile:

Drop-down selections are Default, Delete, Save, Save As...

Mode:

Automatic. Packet capture is automatically started when pressing the

CAP ON

function key.

Buffer Size:

Defines the size of the storage allocated to packet capture.

Truncate:

Captures the whole frame or first number of bytes of that frame.

Tap on the

Filter

tab to select frame header parameters to filter for. Refer to

Header Setup (FC-2 only)

for a brief description of each

parameter.

Press the green

Start

button to begin packet capture. To store these results packets:

1. Press

Stop

, then press

Save as

RXT-3900 e-Manual D07-00-111P Rev A00

Содержание RXT3900
































































































































































































































































































































































































Результаты поиска

Содержание RXT3900

Отзывы:

Похожие инструкции для RXT3900

Бренды по названию

Популярные бренды

VeEX RXT3900, Руководство пользователя

Результаты поиска

Содержание RXT3900

Отзывы:

Похожие инструкции для RXT3900

Бренды по названию

Популярные бренды