QUICK START GUIDE: RTU-300/320/600
VeEX Inc. 2827 Lakeview Court, Fremont, CA 94538 USA Tel: +1.510.651.0500 Fax: +1.510.651.0505
4
Dual power options with back up DC (15V or 48V):
Connecting to the Unit
There are two ways to connect to the unit: via the serial port or via the Ethernet port using the ReVeal Probe
Configurator Tool (with the factory default IP address 192.168.1.1 or when it is a known IP address to the user). If
the IP address is unknown, the serial port must be used to assign/verify an IP address. Connect via VNC or VeSion
to configure the unit and run tests.
1.
Download the required software package from the VeEX Software Download Page:
https://www.veexinc.com/en-us/Support/Software.
Use the unit’s serial number to find the correct file.
2.
Launch the
ReVeal Probe Configurator Tool
. Select the correct port to connect via serial connection on your
PC. In this case, we are using
COM3
. Select the
Probe Type
as
RTU-300
. Click
Open
.
Power
Button
Serial
Port
Ethernet
Port
15
V
48V
Unit Serial
Number
