QUICK START GUIDE: RTU-300/320/600
VeEX Inc. 2827 Lakeview Court, Fremont, CA 94538 USA Tel: +1.510.651.0500 Fax: +1.510.651.0505
13
Loading a Test Application via Web Remote Access/VNC (Standalone
Mode)
1.
Log in to the RTU using VNC. Type the IP address configured previously after launching the VNC app. The default
password is
pass1
. To start testing, load the required test application using the
New
button in Port Group 1 or
Port Group 2.
.
2.
Select the desired test application and press
OK
to launch it.
Follow the TX320s and TX300-100G User Manual instructions to set up a Loopback, Throughput, RFC-2544 or V-
SAM Test. You can find them in the downloads section of the product page at
