If a Static connection mode is selected, the user is required to enter a Local IP, Subnet, Gateway, and DNS IP (if the DNS server
option is turned on)
Note:
A DNS IP address is required when using URL format as a destination address. The user needs to establish an IP
connection and address prior to Ping, Trace Route, Web/FTP, ARP Wiz, VoIP, and IPTV testing.
LX100A IP connection - Result
Note: IP Connection
Ensure the Status is PASS and the IP icon is green before continuing with any IP tests. If the status fails,
go back to the setup screen to verify that the parameters are entered correctly - also ensure that the
Ethernet cable is connected properly before trying to reconnect. Check the status LED on the Ethernet
connector (on the side of the unit) to look for port and network activity.
5.2 Advanced IP
An IP test will verify that the IP network is configured properly and connected to the Internet. Depending on the IP options
LX100 e-Manual D07-00-019 Rev A01
Page 9 of 44
