Typical WiFi Wiz Application
The WiFi Wiz function supports:
WEP Encryption
Scanning
SSID broadcasting and report
Signal Strength
Mode (AP, IF) and Security
IP Connection and Ping Test
Setup:
Plug the WiFi adaptor into the USB port. Allow at least 30-45 seconds for the unit to detect the wireless adaptor and for the
software driver to load.
VPAL products support Linksys USB wireless adaptors only and have the necessary software driver built into the Linux
operational system. Do not use other wireless adaptors as this may damage the unit.
Tap on the pull down menu to turn the wireless USB adapter on. An information box will display the initiation process of the
USB and this process will take about 90 seconds.
Ensure the USB wireless adapter is connected before turning it on.
WiFi Adaptor
LX100A WiFi setup - Activation
LX100 e-Manual D07-00-019 Rev A01
Page 18 of 44
