FX87 DWDM Tunable Laser Source User’s Manual
Page
12
of
39
3. Press
|Up|
and
|Down|
to select the parameter to edit.
4. Press
|MODE|
to select the field to edit, then change the value if necessary, by
pressing
|Up|
and
|Down|
.
5. Press
|Shift/Enter|
to save the date and time settings.
6.3 Resetting FX87
On rare occasions resetting the FX87 device may be needed. To do this:
1. Disconnect external power supply from the device;
• With device OFF, press the red
|Power|
button and hold it for at least 15 seconds.
The FX87 will reboot. Set the date and time after every reboot (see
Section
Because of the reset, the reference values will be lost, so set these values again
and also perform ZERO level operation (see Section
The reset DOES NOT erase any previously stored measurement data.
