VeEX FX150 Скачать руководство пользователя страница 66

Страница: 66 / 128

OTDR Series

e-Manual, RevE00

Page 66 of 128

7.0 OTDR Setup

Screens provided in this section are based on the V300 series OTDR. Slight

differences may occur between FX150, FX300, MTTplus, or RXT platform

screens when describing OTDR and OPM operation.

The

Fiber Main Menu

is available for the FX150 series OTDR only, at this time. There are

three

possible

OTDR test modes:

•

EZ-OTDR

: Select this option for Automatic setups only.

•

V-Scout (

optional)

: Default Auto profile. Select this option to use factory or user

defined auto test profiles with summary results displayed on a LinkMap.

•

Expert OTDR

: Select this option to customize setups and/or manually override the

default options. Realtime, Manual, Auto, and V-Scout are all available from this option.

7.1 Wavelengths

Select desired wavelength for fiber properties.

•

OTDR

- If the OTDR contains both single and multi-mode optical fiber test ports,

selecting a single-mode OTDR wavelength (SM1310, SM1550, SM1625) will

automatically prevent the selection of multimode OTDR wavelengths (MM 850,

MM1300) and vice versa.

•

OTDR Aux

- The Aux port is reserved for:

•

In-service filtered testing at 1625nm or 1650nm.

•

Multimode testing when OTDR is equipped with both singlemode and multimode

capability

RXT-4111/RXT-4113 only

•

Frequency

– The displayed frequency automatically matches the chosen test

wavelength/channel.

•

DWDM Grid

(RXT

4111)

– Select the test wavelength.

•

XWDM Grid

(RXT-4113)

- Select CWDM or DWDM (50, 100, or 200GHz)

•

CWDM Unit

(RXT-4113)

– Select the test wavelength.

•

DWDM Channel

(RXT-4113)

– Select the test channel.

Содержание FX150

































































































































Результаты поиска

Содержание FX150

Отзывы:

Бренды по названию

Популярные бренды

VeEX FX150, Руководство пользователя

Результаты поиска

Содержание FX150

Отзывы:

Бренды по названию

Популярные бренды