FX15 OPTICAL IDENTIFIER
P a g e
| 2
Operation
1.
Slide down battery cover and install 9V battery
2.
Remove Sun Shade cover.
3.
With Test button down/open, slide one of the three available fiber chucks into place.
•
2mm cable
•
3mm cable
•
900 for bare fiber and/or ribbon cable
4.
Install test fiber into alignment chuck. Push up and lock button into place.
Note: Make sure fiber is seated properly before you shut/lock the button to avoid damage to test fiber.
About VeEX
VeEX Inc., a customer-oriented communications Test and Measurement company, develops innovative test and monitoring
solutions for next generation telecommunication networks and services. With a blend of advanced technologies and vast
technical expertise, VeEX products address all stages of network deployment, maintenance, field service turn-up, and
integrate service verification features across Copper, Fiber Optics, CATV/DOCSIS, Mobile 4G/5G backhaul and fronthaul,
next generation Transport Network, Fibre Channel, Carrier & Metro Ethernet technologies, WLAN and Synchronization.
P/N: D02-00-042P
Rev. A00 | June 2019
2827 Lakeview Court, Fremont, CA 94538, USA | Tel.: +1 (510) 651-0500 | Fax: +1 (510) 651-0505 | [email protected]
