VeEX CX380C, Руководство пользователя

Страница: 17 / 105

6.0 Setup
Channel Tables
Locations
Test Point Compensation
Test mode, test port/s and network settings are required prior to performing any measurements or applications.
Go back to top Go back to TOC
6.1 Channel Tables
The unit requires Channel Tables to perform measurements in Single Channel mode. By default, the unit is preloaded with several
channel tables, according to industry standard Annex A, B, and C systems.
Selecting a Channel Table
1. In the left panel, tap Setup<Main Menu .
2. At the bottom, tap Tbl drop-down arrow ( ) and select a table from the drop-down menu.
Channel Table Selection
Go back to top Go back to TOC
Editing or Creating New Channel Tables
To create new channel tables or edit existing ones:
1. In the left panel, tap Setup<Main Menu .
2. At the bottom, tap Tbl drop-down arrow ( ) and select a table from the drop-down menu.
3. On the
Channel Table Selection
screen, tap the
Channel Table
drop-down arrow ( ) select
Manage
.
4. On the Channel Table List screen, select a table and press the Edit button.
5. On the Channel Table Editor screen, make changes as required and press Save . To add this table to the existing list, type a
new name for the table. For field descriptions, see Setup - Main Menu .
CX380C User Manual RevA00 Page 17 of 105