VeEX CX380C, Руководство пользователя

Страница: 21 / 105

6.3 Test Point Compensation
Test point compensation allows the loss at a certain test point to be compensated automatically. When performing a measurement,
one of these preset test points can be selected by tapping the check box. The test set stores 10 sets of TP compensation values by
name.
To edit measurement thresholds for the preset locations:
1. In the left panel, tap Setup<Main Menu .
2. At the bottom, tap Loc drop-down arrow ( ) and select a Location from the drop-down menu.
3. After editing the values, press Save .
TP Selection
Forward Comp (dB) : Downstream related measurements, such as Single Channel, Installation Check, and Cable Modem
Downstream Levels.
Return Comp (dB) : Cable Modem Upstream Transmit Levels.
TP Editor
Go back to top Go back to TOC
CX380C User Manual RevA00 Page 21 of 105