4.3.1 Front Panel
The front panel of the CX180F/R contains input connectors and status LEDs.
4.3.2 Rear Panel
Connector label
Function
DC1-DC2
Power input, DC1 main input, DC2 (if ordered) secondary input
RS-232
Serial console port for system management
10/100 BT
Network Management System port, RJ-45 connector port -Provides a di-
rect Fast Ethernet link for out-of-band management traffic
4.3.3 Grounding
Provide grounding connector.
4.4 safety Guidelines
This section provides general safety guidelines to prevent injury during equipment installation and operation. It
includes the following:
y
Electrical Equipment Guidelines
y
Chassis Lifting Guidelines
Only trained and qualified personnel should install, replace, or service this equipment.
This equipment must be grounded. Never defeat the ground conductor or operate the
equipment in the absence of a suitably installed ground conductor. Contact the appropri
-
ate electrical inspection authority or an electrician if you are uncertain that suitable ground
-
ing is available.
Do not work on the system or connect or disconnect cables during lightning activity.
Page 6 of 13
CX180F_R Hardware Installation Guide D07-00-018 Rev C00
