20
Press the button ("H" - Table 2 "Control panel") twice to
access the detergent and rinse aid adjustment parame-
ters.
The display shows
which is the first parameter of
the dispenser family:
1. Use the Wash cycle 1 ("E" - Table 2 Control panel)
and Wash cycle 2 ("F" - Table 2 Control panel) but-
tons to select the parameter to modify.
2. Press the button ("H" - Table 2 Control panel) to mod-
ify the parameter value.
3. Press the Wash cycle 1 ("E" - Table 2 Control panel)
and Wash cycle 2 ("F" - Table 2 Control panel) but-
tons respectively to decrease/increase the value.
4. Press the button ("H" - Table 2 Control panel) to store
the set value and return to parameter selection (see
point 1).
For example, to adjust the parameter
, proceed as
follows:
•
access the programming mode
•
access the dispenser family
•
Select the parameter
•
modify the parameter value
Press the button ("H" - Table 2 "Control panel") to store
the set value as shown in the picture.
Parameter description
Value (*)
Unit of measure of dispensers
(
= g/l or
= seconds)
Initial amount of detergent
2,00 g/l
55 s
Initial amount of rinse-aid
0,12 g/l
11 s
Amount of detergent during
the cycle
2,00 g/l
5 s
Amount of rinse-aid during
the cycle
0,12 g/l
2 s
(*) The values given in the table refer to the factory-
settings.
USr
DiS
dun
USr
USr
DiS
dun
dun
DlN
37