Veeder-Root TLS-RF Series, Быстрый старт

Страница: 17 / 26

14
Gateway User Interface
The Gateway provides a User Interface (UI) that is accessible through a web browser. Although most
TLS–RF Series 4 Wireless System installations will not require any changes to the Gateway
configuration through the UI, certain installations may either benefit from or require Gateway
configuration changes through the UI.
The Gateway UI can be returned to its factory default state by holding the Gateway’s reset button for
between 5 and 30 seconds and then releasing. Note that holding the Gateway’s reset button for less
than 5 seconds and then releasing will reboot the Gateway without changing its configuration.
Upon logging into the Gateway UI as described in the “Change Gateway Password” section the Device
Information home page will be displayed. Figure 12 depicts the home page with the menu of available
pages on the left side fully expanded.
Figure 12. Gateway Home Page with Menu Expanded