Veeder-Root TLS-50 Series, Настройка и эксплуатация

Страница: 4 / 116

1
Introduction
This manual contains setup and operation instructions for the Veeder-Root TLS-50 Tank Monitoring System. The
Authorized Service Contractor is cautioned to verify that the TLS-50 Console and probes are installed and wired
correctly following the procedures outlined in the TLS-50 Site Prep Manual, before beginning the setup
procedures contained herein.
Related Manuals
577013-608 TLS-50 Site Prep Manual
TLS-50 Description
The TLS-50 Tank Monitoring System monitors up to six in-tank probes for a wide variety of fluids. Probes are
available to measure inventory only or inventory plus product temperature and/or water height. System status is
available to the operator through a front panel display and remotely, via an optional RS-232 serial interface port
(Figure 1).
Figure 1. Console Inputs and Outputs
1 2 3
4 5 6
115/230 V ac
Console Power
Console
Monitor Up To 6 Probes
In Customer's Tanks
Overfill Alarm Relay Output
with Alarm Package Option
Serial Interface Port with Serial Package Option
To Customer's Overfill Alarm
Customer's Printer, Modem, or Computer
(Limited to one external device)
From Customer's Power Source
consoles\tls50\50site.eps
ALL FUNCTIONS NORMAL
T1 VOL: 9889 GAL