Veeder-Root TLS-350 Series, Руководство по установке

Страница: 21 / 29

TCP/IP Module IP Address/Configuration Using Telnet Entering the TCP/IP Interface Module’s IP Address
17
c.The Windows Features screen will appear. Once it has completed loading, scroll down and check of the box
for Telnet Client , then select OK:
With the PC connected to the TCP/IP Interface Module as discussed in the previous secton, perform the steps
below.
1. Command prompt must be opened as an Administrator. Right click the Command Prompt icon, then select
Run as administrator :
1. At the DOS command prompt type (the spaces between words and letters in all entries must be entered as
shown or the address will not be successfully assigned):
arp -s y.y.y.y 00-20-4a-xx-xx-xx
(
where y.y.y.y is the IP address of the TCP/IP module (see your network administrator) and 00-20-4A-xx-xx-xx
is the number from the label on the back of your TCP/IP module [see Figure 1 on page 4]).
Press Enter.
The module’s IP address is added to the ARP table and the screen will return to the DOS command prompt.
Type
ARP -A
at the DOS command prompt and press Enter to view the contents of the ARP table and verify
the presence of the TCP/IP Interface Module’s IP Address.
2. At the DOS command prompt type:
telnet y.y.y.y 1
Press Enter.
The following message will appear: