![Veeder-Root TLS-350 Series Скачать руководство пользователя страница 10](http://html1.mh-extra.com/html/veeder-root/tls-350-series/tls-350-series_installation-manual_3807566010.webp)
TCP/IP Interface Module Installation
Installing the TCP/IP Interface Module in the Console
6
TLS-350/PROMAX SERIES CONSOLES
1. Open the left door of the console. Verify that the battery backup switch (SW1) is in the ‘On’ position (see
4), then turn off power to the console.
Legend for numbered boxes
in Figure
1. TX (red)
2. RX (green)
3. Bracket secured in notch
4. Remove blank in console
base for access to module's
plug-in connector
5.
#4-40 x 0.312” taptite
screw - T-10 Torx drive
6. Module bracket
7. Module plugs into male
connector on motherboard
Figure 3. Installing TCP/IP module into TLS-300/ProPlus console
Legend for numbered
box in Figure
1. Battery backup switch
(S1) shown in ‘On’
position (up).
Figure 4. TLS-350/ProMax Series console battery backup switch location
Содержание TLS-350 Series
Страница 1: ...Manual No 577013 776 l Revision F TCP IP Interface Module Installation Guide...
Страница 29: ......